Stairs by floor height · 2.70 m · U-shaped, landing
U-shaped stairs with a landing for a 2.70 m floor height
15 risers of 18 cm and 14 treads 27 cm deep, at 34°. 1.00 m wide, it takes 2.10 m × 2.89 m of floor. 7 risers up to the landing, 8 from it to the floor above.
Open this stair in uCADWhat it’s made of
More or fewer steps
2.70 m (270 cm) can be climbed in fewer, higher steps or more, lower ones. Each opens in uCAD as this stair with that many risers.
| Risers | Each riser | Going | Pitch | Run of a straight flight | How it walks | In uCAD |
|---|---|---|---|---|---|---|
| 13 | 20.8 cm | 25 cm | 40° | 3.00 m | steep: over 20 cm, more than many codes allow | open |
| 14 | 19.3 cm | 25 cm | 38° | 3.25 m | steeper, fewer steps | open |
| 15 | 18 cm | 27 cm | 34° | 3.78 m | comfortable (drawn here) | open |
| 16 | 16.9 cm | 29 cm | 30° | 4.35 m | comfortable | open |
Limits differ by country: England’s Approved Document K allows a rise up to 220 mm and a pitch up to 42° in a home, Germany’s DIN 18065 up to 200 mm, and both ask for 2.0 m of headroom. Check the code that applies to yours.
What it’s made of
Drawn as it’s built, in timber with open treads: treads housed in the stringers, posts under the turns, a railing on its newels. 321 parts in all, every bolt and weld among them. Sizes in millimetres, length × width × thickness.
| Part | Qty | Length | Width | Thickness |
|---|---|---|---|---|
| landing (shaped) | 1 | 2144 | 1046 | 40 |
| stringer (shaped) | 1 | 2393 | 264 | 50 |
| stringer (shaped) | 1 | 2279 | 264 | 50 |
| stringer (shaped) | 1 | 2020 | 280 | 50 |
| stringer (shaped) | 1 | 2024 | 264 | 50 |
| stringer (shaped) | 1 | 1944 | 264 | 50 |
| tread | 11 | 1030 | 295 | 40 |
| tread (shaped) | 2 | 1030 | 295 | 40 |
| stringer | 1 | 915 | 280 | 50 |
| stringer (shaped) | 1 | 915 | 280 | 50 |
| post, timber 90x90 | 1 | 2432 | 90 | 90 |
| post, timber 90x90 | 1 | 2212 | 90 | 90 |
| beam, timber 50x150 | 2 | 920 | 150 | 50 |
| post, timber 90x90 | 1 | 1522 | 90 | 90 |
| post, timber 90x90 | 1 | 1380 | 90 | 90 |
| post, timber 90x90 | 3 | 1295 | 90 | 90 |
| post, timber 90x90 | 1 | 1199 | 90 | 90 |
| handrail, round 50 mm (shaped) | 1 | 2152 | 49 | 49 |
| handrail, round 50 mm (shaped) | 1 | 1827 | 49 | 49 |
| baluster, steel square bar 18 mm (shaped) | 24 | 847 | 18 | 18 |
Fixings: 24 × stud M8x80, glued, 24 × screw 5x45, 7 × bracket, concealed post base 90, 16 × anchor bolt M10x100, 73 × washer M10, 50 × nut M10, 14 × stud M10x117, 2 × anchor bolt M10x200, 2 × bracket, steel angle 100x100x8, 2 × stud M10x85, 23 × bolt M10x170, 23 × nut M10, barrel, 4 × bracket, joist hanger 50x150.
Closed risers, a steel frame, another width or railing: change it in uCAD, and the parts are worked out again, with a cut list of the boards to buy. Sizes of the structure are the library’s defaults for a house stair, not an engineer’s calculation for yours.
Another height or width
Will it fit your room?
Open it in uCAD, draw your walls round it and look: turn it the other way, move the turn up or down, change the width. Or tell the AI: “a stair for 2.70 m in a 2 × 3 m stairwell”, and it draws one that fits.
Same height: Straight · L-shaped, landing · L-shaped, winders · U-shaped, winders · Spiral · Square spiral
This stair for 2.65 m · 2.75 m · all heights