Stairs by floor height · 3.30 m · U-shaped, landing
U-shaped stairs with a landing for a 3.30 m floor height
19 risers of 17.4 cm and 18 treads 28 cm deep, at 32°. 1.00 m wide, it takes 2.10 m × 3.52 m of floor. 9 risers up to the landing, 10 from it to the floor above.
Open this stair in uCADWhat it’s made of
More or fewer steps
3.30 m (330 cm) can be climbed in fewer, higher steps or more, lower ones. Each opens in uCAD as this stair with that many risers.
| Risers | Each riser | Going | Pitch | Run of a straight flight | How it walks | In uCAD |
|---|---|---|---|---|---|---|
| 17 | 19.4 cm | 25 cm | 38° | 4.00 m | steeper, fewer steps | open |
| 18 | 18.3 cm | 26 cm | 35° | 4.42 m | comfortable | open |
| 19 | 17.4 cm | 28 cm | 32° | 5.04 m | comfortable (drawn here) | open |
| 20 | 16.5 cm | 30 cm | 29° | 5.70 m | comfortable | open |
Limits differ by country: England’s Approved Document K allows a rise up to 220 mm and a pitch up to 42° in a home, Germany’s DIN 18065 up to 200 mm, and both ask for 2.0 m of headroom. Check the code that applies to yours.
What it’s made of
Drawn as it’s built, in timber with open treads: treads housed in the stringers, posts under the turns, a railing on its newels. 358 parts in all, every bolt and weld among them. Sizes in millimetres, length × width × thickness.
| Part | Qty | Length | Width | Thickness |
|---|---|---|---|---|
| landing (shaped) | 1 | 2144 | 1046 | 40 |
| stringer (shaped) | 1 | 3076 | 263 | 50 |
| stringer (shaped) | 1 | 2964 | 263 | 50 |
| stringer (shaped) | 1 | 2704 | 263 | 50 |
| stringer (shaped) | 1 | 2622 | 263 | 50 |
| stringer (shaped) | 1 | 2020 | 280 | 50 |
| tread | 15 | 1030 | 305 | 40 |
| tread (shaped) | 2 | 1030 | 305 | 40 |
| stringer | 1 | 915 | 280 | 50 |
| stringer (shaped) | 1 | 915 | 280 | 50 |
| post, timber 90x90 | 1 | 2726 | 90 | 90 |
| post, timber 90x90 | 1 | 2515 | 90 | 90 |
| post, timber 90x90 | 1 | 1816 | 90 | 90 |
| post, timber 90x90 | 3 | 1598 | 90 | 90 |
| handrail, round 50 mm (shaped) | 1 | 2848 | 49 | 49 |
| beam, timber 50x150 | 2 | 920 | 150 | 50 |
| post, timber 90x90 | 1 | 1370 | 90 | 90 |
| handrail, round 50 mm (shaped) | 1 | 2519 | 49 | 49 |
| post, timber 90x90 | 1 | 1188 | 90 | 90 |
| baluster, steel square bar 18 mm (shaped) | 34 | 846 | 18 | 18 |
Fixings: 34 × stud M8x80, glued, 34 × screw 5x45, 7 × bracket, concealed post base 90, 16 × anchor bolt M10x100, 74 × washer M10, 50 × nut M10, 14 × stud M10x117, 2 × anchor bolt M10x200, 2 × bracket, steel angle 100x100x8, 2 × stud M10x85, 24 × bolt M10x170, 24 × nut M10, barrel, 4 × bracket, joist hanger 50x150.
Closed risers, a steel frame, another width or railing: change it in uCAD, and the parts are worked out again, with a cut list of the boards to buy. Sizes of the structure are the library’s defaults for a house stair, not an engineer’s calculation for yours.
Another height or width
Will it fit your room?
Open it in uCAD, draw your walls round it and look: turn it the other way, move the turn up or down, change the width. Or tell the AI: “a stair for 3.30 m in a 2 × 3 m stairwell”, and it draws one that fits.
Same height: Straight · L-shaped, landing · L-shaped, winders · U-shaped, winders · Spiral · Square spiral
This stair for 3.25 m · 3.35 m · all heights